Test-products-international 275 Manual do Utilizador descarregar pdf (Página 8)

3. Specifications

IEC 1010 Over Voltage:

CAT II - 1000V

CAT III - 600V

Pollution Degree 2

Temperature for gauranteed accuracy: 23ºC +

5ºC

DC VOLTS

Range Res. Accuracy

110mV 0.1mV

Impedance:

1V 0.001V +/-(0.5% of reading + 2 digits) 10MΩ

11V 0.01V Overload Protection:

110V 0.1V 600VDC or AC RMS

600V 1V

(45Hz to 100Hz Frequency Response 400mV Range)

AC VOLTS

(45Hz to 450Hz Frequency Response All Other Ranges)

Range Res. Accuracy

110mV 0.1mV

+/-(1.2% of reading + 5 digits) Impedance:

1V 0.001V

+/-(1.2% of reading + 3 digits) 10MΩ

11V 0.01V

Overload Protection:

110V 0.1V

+/-(1.5% of reading + 3 digits) 600VDC or AC RMS

600V 1V

DC Microamps

Range Res. Accuracy

110uA 0.01µA

+/-(0.8% of reading + 2 digits) Overload Protection:

1100uA 0.1µA 0.5A / 600V Fusee

* DC microamps are measured with the test leads in series with

the circuit under test.

DC AMPS

Range Res. Accuracy

110A 0.01A

+/-(3% of reading + 10 digits)

400A 0.1A e

OHM (Resistance, Ω)

Range Res. Accuracy

110Ω 0.01Ω ±(1% of reading +5 digits)

1kΩ 0.0001kΩ ±(1% of reading +2 digits)

Overload Protection:

11kΩ 0.001kΩ 250VDC or AC RMS

110kΩ 0.01kΩ

1MΩ 0.0001MΩ ±(3% of reading +5 digits)

11MΩ 0.001MΩ ±(3% of reading +10 digits)

110MΩ 0.1MΩ ±(3% of reading +10 digits)

Frequency (Hz)

Range Res. Accuracy

1100.0Hz 0.1Hz

±(1% of reading +2 digits)

11.000kHz 0.001kHz

110.00MHz 0.01kHz

Overload Protection:

1.1000MHz 0.0001MHz 250VDC or AC RMS

11.000MHz 0.001MHz

110.00MHz 0.01MHz

UL 3111 Pending

(45Hz to 100Hz Frequency Response 200A to 400A)

AC AMPS (45Hz to 450Hz Frequency Response Below 200A)

Range Res. Accuracy

110A 0.01A

+/-(3.0% of reading + 5 digits)

400A 0.1A e

Warning: Use only correct type and overvoltage

category rated test leads. Remove the

temperature probe when using the test

leads or amp clamp.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 39 40

Comentários a estes Manuais

Sem comentários

Test-products-international 275 Manual do Utilizador Página 8

Comentários a estes Manuais

Manuais e produtos relacionados com Instrumentos de medida Test-products-international 275